伺服懸臂薄板斜立式 收( 放) 板機

設備主要用途/Main Application:
主要用于薄板制程. 如:內層前處理、涂布線、自動爆光機、SES等.
It is mainly used in the thin board treatment process, such as pretreatment of I/L, Coating line, Auto Exposure Machine, SES etc.

設備規格/Device Spec: 

a：長x寬x高(L1400*W1295*H1800)mm

b：工作高(STD)/ Working Height:：WH=900mm±25 mm
c：適用板件規格/PCB Size： Max:610mm*610mm    Min: 250mm*250mm
厚度/Thickness: 0.075mm-3.2mm       產速/Capacity: 8 panels/min
設備特點/Features:
a、手臂采用伺服馬達做動力鏈條傳動，其結構穩定，精度準確。
b、具有二段式整板裝置，拍薄板不會有拱起 現象 。
c、配合各種板件，可于人機面板設定參數，達到最佳工作效能 。
d 、吸板方式以12只吸盤組吸板，可任意調節。
e 、所搭配的板架與行業內同系列設備可通用。
f 、具有檢測兩片功能
g 、設備耗電，耗氣低且具有省電模式
a. Robot arm is driven by servo motor which is stable and precise.
b. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
c. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
d. 12 group of suction trays are used to suck the panel.
e. The pallet used on this device is current.
f. Equipped with overlap checking function.
g. With low power consumption and air consumption and it also has a power saving model.

上一主題：5 0 片履帶式翻板機

下一主題：薄板自動刨邊線